This is the new series of ZTW 32 Bit G2 90A ESCs which support 3 to 8S batteries with 6V\/7.4V\/8.4V 8A SBEC (receiver power supply), the design is new and narrower than the previous series.<\/p>\n
The SEAL G2 series is specially designed for RC hulls, with a waterproof shell.<\/p>\n
In order to protect the electronics, the motor and the batteries, the ESC has an electronic system that reduces power in the event of overheating or low battery voltage.<\/p>\n
<\/p>\n
Key Features:<\/p>\n
1. New generation electronics that resist large instantaneous absorptions.<\/p>\n
2. Adopts high-performance 32-bit microprocessor, the operating frequency is up to 170MHz which gives the G2 sere esc higher computing capacity.<\/p>\n
3. The waterproof design (rates as IP 67) allows this ESC to operate in wet conditions and features water cooling applied to a metal plate to ensure efficient heat dissipation.<\/p>\n
4. Super smooth and accurate throttle linearity makes the ESC suitable for various types of hulls: mono, cat, F1 or reproductions.<\/p>\n
5. The ESC has two driving modes for different applications: “forward only” and “forward and reverse”. (I do not recommend reverse if you have a flexible axle!)<\/p>\n
7. Multiple Protections: start, overload, low voltage cut-off, signal loss, phase loss, over-current, abnormal supply voltage, overload protection.<\/p>\n
8. Compatible with high rpm brushless motors and compatible with most motors on the market.<\/p>\n
9. Support programming via phone app or LCD program card, operation easier and more convenient (ZTW Extra App adapter or LCD program box needed G2.)<\/p>\n
<\/p>\n
Technical specifications<\/p>\n
Continuous current (A): 90 amps<\/p>\n
Inrush current (A): 540 amps<\/p>\n
Voltage: 3-8S Lipo<\/p>\n
BEC output for the receiver: 6V\/7.4V\/8.4V 8A – connectors fit the classic JR ones, they are also good on Futaba<\/p>\n
Power Cable: 12 Gauge80mm-Red\/80mm-Black<\/p>\n
12 Gauge Motor Wire 65mm – Black<\/p>\n
The throttle works in both forward and reverse gear or you can lock the reverse function for racing safety.<\/p>\n
Optional programming with G2 LCD programming card.<\/p>\n
Case Dimensions (Cables Not Included):<\/p>\n
Length: 88mm<\/p>\n
Width: 38mm<\/p>\n
Height: 24mm<\/p>\n
Weight: 110g<\/p>\n
<\/p>\n
<\/p>","protected":false},"excerpt":{"rendered":"
This is the new series of ZTW 32 Bit G2 90A ESCs which support 3 to 8S batteries with 6V\/7.4V\/8.4V 8A SBEC (receiver power supply), the design is new and narrower than the previous series.<\/p>\n
The SEAL G2 series is specially designed for RC hulls, with a waterproof shell.<\/p>\n
In order to protect the electronics, the motor and the batteries, the ESC has an electronic system that reduces power in the event of overheating or low battery voltage.<\/p>\n
<\/p>\n
Key Features:<\/p>\n
1. New generation electronics that resist large instantaneous absorptions.<\/p>\n
2. Adopts high-performance 32-bit microprocessor, the operating frequency is up to 170MHz which gives the G2 sere esc higher computing capacity.<\/p>\n
3. The waterproof design (rates as IP 67) allows this ESC to operate in wet conditions and features water cooling applied to a metal plate to ensure efficient heat dissipation.<\/p>\n
4. Super smooth and accurate throttle linearity makes the ESC suitable for various types of hulls: mono, cat, F1 or reproductions.<\/p>\n
5. The ESC has two driving modes for different applications: “forward only” and “forward and reverse”. (I do not recommend reverse if you have a flexible axle!)<\/p>\n
7. Multiple Protections: start, overload, low voltage cut-off, signal loss, phase loss, over-current, abnormal supply voltage, overload protection.<\/p>\n
8. Compatible with high rpm brushless motors and compatible with most motors on the market.<\/p>\n
9. Support programming via phone app or LCD program card, operation easier and more convenient (ZTW Extra App adapter or LCD program box needed G2.)<\/p>\n
<\/p>\n
Technical specifications<\/p>\n
Continuous current (A): 90 amps<\/p>\n
Inrush current (A): 540 amps<\/p>\n
Voltage: 3-8S Lipo<\/p>\n
BEC output for the receiver: 6V\/7.4V\/8.4V 8A – connectors fit the classic JR ones, they are also good on Futaba<\/p>\n
Power Cable: 12 Gauge80mm-Red\/80mm-Black<\/p>\n
12 Gauge Motor Wire 65mm – Black<\/p>\n
The throttle works in both forward and reverse gear or you can lock the reverse function for racing safety.<\/p>\n
Optional programming with G2 LCD programming card.<\/p>\n
Case Dimensions (Cables Not Included):<\/p>\n
Length: 88mm<\/p>\n
Width: 38mm<\/p>\n
Height: 24mm<\/p>\n
Weight: 110g<\/p>\n","protected":false},"featured_media":10749,"template":"","meta":{"_acf_changed":false,"_glsr_average":0,"_glsr_ranking":0,"_glsr_reviews":0},"product_cat":[377,397],"product_tag":[],"berocket_brand":[805],"acf":[],"yoast_head":"\n