FSR Race
Showing 1–24 of 66 results
-
RX Batteries, Electronics, FSR Race
Battery RX LiFe 2S 2100 mAh 35C V2 – JR
3 in stock
- Use: Receivers
- Cell type: LiFe
- Dimensions: 30 x 95 x 20mm
- N. Cells: 2 S
- Voltage: 6.6V
- Capacity: 2100mAh
- Weight: 108g
- Balancer connector: JST-XH
- Connector: UNI (JR)
- Download Continue: 35 C
- Peak Discharge: 50C (105 Ampere) C
- Charging current: 1-5C C
SKU: 447923 -
Battery, RX Batteries, Electronics, FSR Race
Battery RX LiFe 2S 3000mAh 35C V2 – JR FSR Race
Out of stock - Made to order
Compatible with radio box TFL art. 755B31
I recommend charging it at 1.0A with balancer and in life mode, do not use it to put it in storage like Lipo when you have finished using it.
New line of FullPower lipo batteries for receiving power supplies (RX), equipped with silicone cable and UNI plug (JR type).
For a good yield and duration of Li-Fe battery packs it is recommended to balance them while charging using suitable tools.
Fullpower batteries are suitable for a charge up to 5C (five times the battery capacity) however, if you do not have particular urgency, it is recommended
SKU: 447924 -
Flex Shaft, FSR Race, Coupler & Joint
Clamp for Flex Shaft Stopper – 526B23 FSR Race
3 in stock
- Steel clamp stopper for flex shaft of 6,35mm/1/4″. It has double M3 screws for stop the shaft.
- Used on Rigger, Hydro Sport, and F1 for lock the flex shaft inside the boat.
- D-outside=18mm
- D-inside=6.35mm
SKU: 526B23 -
Electronics, FSR Race, Switches
Power Switch – RX Switch – FSR Race
2 in stock
The SkyRC Power Switch is an electronic switch to turn on and off the radio device on board the model.
Compatible with NIMH and Lipo batteries, it incorporates a low battery signaling function, but does not stabilize the output voltage, so a Lipo battery can only be used with HV systems or with voltage stabilizers.TIP: (If with the RX battery charged while operating one or more servos, the switch LED flashes red, it means that you have low amperage in the RX battery or that a servo is particularly straining and therefore it will be necessary to check before launching model)
SKU: 447944