-
Electronics, FSR Race, Switches
Power Switch – RX Switch – FSR Race
1 in stock
The SkyRC Power Switch is an electronic switch to turn on and off the radio device on board the model.
Compatible with NIMH and Lipo batteries, it incorporates a low battery signaling function, but does not stabilize the output voltage, so a Lipo battery can only be used with HV systems or with voltage stabilizers.SKU: 447944 -
Battery, RX Batteries, Electronics, FSR Race
Battery RX LiFe 2S 3000mAh 35C V2 – JR
Out of stock - Made to order
New line of FullPower lipo batteries for receiving power supplies (RX), equipped with silicone cable and UNI plug (JR type).
For a good yield and duration of Li-Fe battery packs it is recommended to balance them while charging using suitable tools.
Fullpower batteries are suitable for a charge up to 5C (five times the battery capacity) however, if you do not have particular urgency, it is recommended
SKU: 447924 -
Brushless, Outboard, Electric Motors
Outboard Brushless – B54210
1 in stock
TFL Outboard Drive System Gear Drive 3660/2075KV SSS Motor,W/O Prop, Shaft 4mm DD
- Outboard motor made by CNC and with fiberglass cowl
- The transmission between the motor and the propeller takes place by means of gears.
- Recommended for boats from 65cm to 100cm
- Recommended ESC 120A.
- Recommended batteries: LiPo 4S
- The propeller shaft is 4.76mm diameter with Drive Dog.
- The package does NOT contain the propeller
- Propeller recommended with 6S: art. 3715 (D37mm, 1.5 “pitch) (https://tfl-hobby.tempestrcboats.com/eliche/elica-2-pale-alu-cnc-37mm-3715/)
SKU: B54210 -
-
Material and Glue, Hand Tools
Universal activator for cyan 200 ml
5 in stock
Universal spray activator for cyanoacrylate glues, also suitable for special glues such as DEPRON, EPP, etc.
It speeds up the adhesion of cyanoacrylate glues, a sprinkle on the part to be glued is sufficient, after applying the glue, to block the pieces to be joined in a few seconds.
Convenient 200ml spray pack.
Made in Italy- Glue type: Activator for cyan
- Quantity: 200 ml
- Usage: Cyanoacrylate glues
SKU: 113845 -
-
-
Electronics, ESC, Electric Motors, Section M
ESC 40A Pro
Out of stock - Made to order
Nominal 40 Amp water-cooled regulator (Max 60 Amp x 5 sec.)
Weight complete with cables gr. 45
Max dimensions: 68 x 13.5 x 26.5 mm
Built to manage brushless motors.
Possibility of programming through its card art. Hobbywing 30501003
Recommended accessory for the mini class (Minimono and Minihydro) or all those boats with a length not exceeding 50 cm and weight not exceeding 650 gr.
SKU: ESC_40A_PRO -
Servo
Servo – LW-20MG Waterproof
Out of stock - Made to order
Waterproof Servo
- Torque (4.8V): 16.5 kg-cm
- Torque (6.6V): 20.0 kg-cm
- Speed: 0.18 sec (4.8V) | 0.16 sec (6.6V)
- Operating voltage: 4.8 ~ 6.6 DC Volts
- Weight: 60g
- Bearing Type: Ball Bearing x2
- Motor Type: DC Motor
- Gear type: Copper & Aluminium
- Operating Temperature: -20°C ~ 60°C
- Working frequence: 1520µs / 333mhz
- Size: 40.7 x 20.5 x 36.5mm
SKU: LW-20MG
-
Brushless, Electric Motors
SSS Brushless Motor W/O Water Cooling 2960 series
2 in stock
- Brand: SSSMotor
Diameter (mm): 29mm
L (mm): 60mm
D-shaft (mm): 3.17mm
Poles: 4
Tum: 4.5D
Max Amps (A): 65
Max Voltage (V): 20
Max Power (W): 1300
Idle Current (A): 1.7
Max RPM: 60K
Weight (g): 170g
Cooling: No
SKU: 2960 - Brand: SSSMotor
-
-
FSR Race, Coupler & Joint, Zenoah Plier
Flywheel with Coupler for Zenoah 27CC – 529B52
Out of stock - Made to order
Flywheel with Coupler 6.35mm for Zenoah 27-29-32c.c., compatible with brand gas motors: Zenoah, Tiger King, SG, e BZM Motors.
- Total lenght=47mm
- M6mm -internal screw for fix to motor shaft
- 6.35mm – flex steel coupler
- Outer Flywheel diameter=44.5mm
For open and close the coupler, you need two wrenches of 16 number
SKU: 529B52
Products Grid
Recensioni
Ultimi inseriti
LCD PROGRAM CARD
Out of stock - Made to order
This programming card is specifically designed for the ZTW Series electronic speed controls.
HOW TO USE THE LCD PROGRAM CARD:
The LCD Program card can be used to set up the Gecko series brushless ESC produced by ZTW Model.
Users can choose their desired parameter at any time.
It has 2 user methods as follows:
SPECIFICATIONS:
Dimensions: 91mm*54mm*18mm (L*W*H)
Weight: 68g
Power supply: DC 5V~12V
Emulation Winch with twin motor C1616-01
7 in stock
